NSN 3040-01-722-2547 · NIIN 017222547 · FSC 3040
NO DASHES 3040017222547
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Application: WEAPONS HANDLING ANTWARTSHIP DRIVE GEARBOX ASSEMBLY
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHP | SECOND END STYLE | |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 0.5 |
| AMDR | FIRST END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 0.75 AND INCHES MAXIMUM 0.76 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.919 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.03 AND INCHES MAXIMUM 1.05 |
| BDSQ | FIRST END SPLINE QUANTITY | 20 |
| AAGZ | FIRST END STYLE | |
| AMDM | FIRST END SPLINE LENGTH | INCHES MINIMUM 0.75 AND INCHES MAXIMUM 0.76 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.74 AND INCHES MAXIMUM 2.76 |
| AGAV | END ITEM IDENTIFICATION | WEAPONS HANDLING ANTWARTSHIP DRIVE GEARBOX ASSEMBLY |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 0.857 AND INCHES MAXIMUM 0.875 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 0.5 |
| ATPC | STEP QUANTITY | 3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST--A564 TY-630, COND H1025 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 1.03 AND INCHES MAXIMUM 1.05 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.764 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.857 AND INCHES MAXIMUM 0.875 |
| BDSR | SECOND END SPLINE QUANTITY | 20 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, QUILL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMGE | SECOND END PRESSURE ANGLE | DEGREES NOMINAL 30.0 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 1.03 AND INCHES MAXIMUM 1.05 |