NSN 5990-00-677-6476 · NIIN 006776476 · FSC 5990
NO DASHES 5990006776476
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.1330 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.5320 AND INCHES MAXIMUM 1.5410 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 2.6330 |
| AJSL | BODY SIZE | 16 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 24.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 600.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.184 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 AND INCHES MAXIMUM 0.0830 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1270 AND INCHES MAXIMUM 0.1370 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 2.5775 AND INCHES MAXIMUM 2.5780 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.050 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 25 |
| AAQL | BODY STYLE | |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 40.00 |
Supersedes
This item replaces cancelled NIIN 000206237. An older drawing citing one of those numbers resolves here.