NSN 2840-01-526-8806 · NIIN 015268806 · FSC 2840
NO DASHES 2840015268806
In Stock
SPACER,COMPRESSOR ROTOR,AIRCRAFT
Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components
Application: TURBINE ROTOR ASSY; J52 ENGINE
Technical characteristics
7 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | DRAWING EXPORT CONTROLLED NOT TO BE RELEASED OUTSIDE THE USA; MATT- AMS 6322 OR 6323 STEEL; CONCERNING LENGTH AXIS 1.941" NOM. FROM LENGTH EDGE RAISED PORTION 0.150" NOM WIDTH, TRANSITIONS THRU A FILLET R 0.297"MIN/0.328"MAX TO ANOTHER FILLET FACING IT R 0.031"MIN/0.062"MAX AND IS 0.3" IN HEIGHT. SPACE BETWEEN OTHER LENGTH EDGE AND CLOSEST EDGE OF RAISED PORTION IS 0.97"NOM. LENGTH OF RAISED PORTION IS 0.8885"MIN/0.8975"MAX; THERE ARE GROOVED ROD SHAPED BEARING ROLLERS WITHIN ID OF SLEEVE, ROD IS SPACE 0.250"FROM EDGE OPPOSITE RAISED PORTION; ROD IS 0.25"NOM IN WIDTH; SEVERAL LENGTH ARE CALLED OUT ON DWG FOR DIFFERENT LEVELS OF RAISED PORTIONS, THEY ARE RESPECTIVELY- 4.576"MIN/4.586"MAX AT RAISED PORTION; OTHER SMALLER RAISED PORITION 3.990"MIN/4.010"MAX; MAIN LENGTH ON LARGE RAISE PPORTION SIDE 3.6875"MIN/3.6885"MAX AND ON SMALLER RAISED PORTION LENGTH SIDE 3.690"MIN/3.710"MAX |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 3.061 |
| AGAV | END ITEM IDENTIFICATION | TURBINE ROTOR ASSY; J52 ENGINE |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.688 AND INCHES MAXIMUM 3.689 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SLEEVE-FRONT COMPRESSOR DRIVE TURBINE SHAFT |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 3.437 AND INCHES MAXIMUM 3.447 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Supersedes
This item replaces cancelled NIIN 008307100. An older drawing citing one of those numbers resolves here.