NSN 3020-00-351-9689 · NIIN 003519689 · FSC 3020
NO DASHES 3020003519689
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.000 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.500 |
| STYL | STYLE DESIGNATOR | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.125 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 8.283 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.488 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| ABSA | SPLINE QUANTITY | 6 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 8.0000 |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 8720 OR STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-624,CO- 8720 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-624,CO- 8630 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.500 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | BOTH ENDS INCHES 0.063 |