NSN 3120-00-817-5081 · NIIN 008175081 · FSC 3120
NO DASHES 3120008175081
In Stock
BEARING HALF,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OUTER LAYER STEEL COMP 1008 OR STEEL COMP 1010 |
| AGKD | DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING | SECOND INCHES MAXIMUM 0.6000 |
| AGKD | DISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING | FIRST INCHES MINIMUM 0.5800 |
| BZLX | CORNER SHAPE | ALL CORNERS SQUARE |
| CTJM | ANTIROTATION/LUBRICATION TYPE AND QUANTITY | HOLE 2 |
| CTLF | HOLE SPACING ANGLE | DEGREES NOMINAL 23.0 |
| CTRQ | DISTANCE FROM LUG END TO END OF BEARING | INCHES MINIMUM 0.2300 AND INCHES MAXIMUM 0.2375 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 2.1244 AND INCHES MAXIMUM 2.1254 |
| AGKT | LOCKING LUG HEIGHT | INCHES MINIMUM 0.0310 AND INCHES MAXIMUM 0.0410 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES NOMINAL 2.2500 |
| SFTT | SURFACE TREATMENT | OVERALL TIN |
| MATT | MATERIAL | LUBRICATION OIL LUBRICATING |
| AGKU | LOCKING LUG LENGTH | INCHES MINIMUM 0.1900 AND INCHES MAXIMUM 0.2200 |
| AGKV | LOCKING LUG WIDTH | INCHES MINIMUM 0.1500 AND INCHES MAXIMUM 0.1550 |
| AAUB | HOLE DIAMETER | FIRST INCHES MINIMUM 0.1700 |
| AAUB | HOLE DIAMETER | SECOND INCHES MAXIMUM 0.1900 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.1800 AND INCHES MAXIMUM 1.1900 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 003749738. An older drawing citing one of those numbers resolves here.