NSN 5970-01-093-0413 · NIIN 010930413 · FSC 5970
NO DASHES 5970010930413
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABJH | TEMP RATING | CELSIUS -55.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.080 |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.080 |
| AFZR | DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 2.110 |
| AFZS | DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.150 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.680 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.370 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 1.080 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.680 |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.680 |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AS SUPPLIED NOMINAL 180.0 |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AFTER UNRESTRICTED RECOVERY NOMINAL 90.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1500 |
| FEAT | SPECIAL FEATURES | INSIDE COATED WITH ADHESIVE |
| FLEX | FLEXIBILITY | SEMIRIGID |
| HGTH | HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 1.730 |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED PLASTIC POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED MFR REF SINGLE MATERIAL RESPONSE RT-301, RAYCHE- COR |
| STYL | STYLE DESIGNATOR | |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |