NSN 5935-00-503-5204 · NIIN 005035204 · FSC 5935
NO DASHES 5935005035204
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.750 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 22.0 |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.438 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.090 |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING STEEL |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING TIN |
| CQZG | INSERT MATERIAL | SINGLE MATING END GLASS |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| CSPT | SHELL MATERIAL | STEEL |
| CSWM | SHELL SURFACE TREATMENT | TIN |
| CXCG | INCLUDED CONTACT QUANTITY | 2 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.807 AND INCHES MAXIMUM 0.817 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.653 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.807 AND INCHES MAXIMUM 0.817 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| ADZC | ENVIRONMENTAL PROTECTION | HERMETIC |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.126 |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.126 |
Supersedes
This item replaces cancelled NIINs 006606904 · 010356770. An older drawing citing one of those numbers resolves here.