NSN 5331-00-455-6406 · NIIN 004556406 · FSC 5331
NO DASHES 5331004556406
In Stock
O-RING
O-Ring
Application: TORPEDO MK 46 MOD 5
Technical characteristics
8 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PACKING, PREFORMED |
| ADVN | CROSS-SECTIONAL HEIGHT | INCHES MINIMUM 0.067 AND INCHES MAXIMUM 0.073 |
| ADYT | CENTER HOLE DIAMETER | INCHES MINIMUM 1.854 AND INCHES MAXIMUM 1.874 |
| AGAV | END ITEM IDENTIFICATION | TORPEDO MK 46 MOD 5 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SUPP | SUPPLEMENTARY FEATURES | IMMERSIAN IN OIL SAE 30, NON-DETERGENT, FOR 70 HOURS AT 212 DEGREES FAHRENHEIT SHALL NOT EXCEED THE FOLLOWING: TENSILE STRENGTH: 20%; ELONGATION: 25; VOLUME CHANGE: 3%; HARDNESS CHANGE: 6 POINTS DUROMETER |
| FEAT | SPECIAL FEATURES | RUBBER 70 DUROMETER I/A/W ASTM D735-581 SB715 BE, F (FOR F, USE TEST METHOD ASTM D736) EXCEPT THAT MATERIAL PROPRIETARY CHANGES FOLLOWING |
| MATT | MATERIAL | RUBBER |