NSN 5905-00-836-6006 · NIIN 008366006 · FSC 5905
NO DASHES 5905008366006
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.281 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.0880 AND INCHES MAXIMUM 1.0930 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0560 AND INCHES MAXIMUM 0.0640 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 6 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0580 AND INCHES MAXIMUM 0.0660 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 2.000 AND KILOHMS 2ND SECTION 5.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.015 TO 0.015 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 1ST SECTION -650.0 TO 650.0 AND 2ND SECTION -950.0 TO 950.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK ALL SECTIONS 1.5 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 7.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 85.0 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.057 AND INCHES MAXIMUM 1.067 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.562 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9975 AND INCHES MAXIMUM 1.0025 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 353.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.125 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0420 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.781 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.0295 AND INCHES MAXIMUM 1.0300 |
Supersedes
This item replaces cancelled NIIN 007954989. An older drawing citing one of those numbers resolves here.