NSN 6105-00-617-1095 · NIIN 006171095 · FSC 6105
NO DASHES 6105006171095
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 70000.0 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.3750 |
| AAJU | OVERALL LENGTH | INCHES 2.485 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.300 |
| AAJT | OVERALL HEIGHT | INCHES 1.749 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| FAAZ | PHASE | INPUT TWO |
| ABSA | SPLINE QUANTITY | 15 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.177 |
| ACDC | CURRENT TYPE | INPUT AC |
| BFMF | COOLING METHOD | AMBIENT AIR |
| AXGY | MOUNTING METHOD | FACE |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 120.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.250 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 9800.0 |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 128.0 AND 510.0 |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED OR TWO WINDINGS, PARALLEL CONNECTED |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 2.6 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 57.5 AND AC 115.0 |
| AAJV | OVERALL WIDTH | INCHES 1.749 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.1083 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
Supersedes
This item replaces cancelled NIINs 003377711 · 006171096 · 006354859 · 008055648 · 007962910. An older drawing citing one of those numbers resolves here.