NSN 2520-00-734-2581 · NIIN 007342581 · FSC 2520
NO DASHES 2520007342581
In Stock
TRANSFER TRANSMISSION ASSEMBLY
Vehicular Power Transmission Components
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ARZJ | FLANGE BOLT HOLE DIAMETER | INCHES NOMINAL 0.375 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 17.750 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 23.875 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 16.875 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.500 |
| BNZT | MOUNTING FACE WIDTH | INCHES NOMINAL 3.500 |
| AZFF | BOLT HOLE SPACING | ON 2-55/64 IN. BY 2-1/2 IN. CENTER /APPROX/ |
| ALXY | MOUNTING HOLE SPACING | 2 HOLES ON EACH MTG BOSS,2 MTG BOSSES ON EACH SIDE HOLES SPACED 2-3/4 IN. C TO C VERTICALLY HORIZONTAL SPACING NOT STATED |
| BNZX | OUTPUT SHAFT END QUANTITY | 3 |
| BNZY | OUTPUT SHAFT END TYPE | FLANGED |
| AHNX | BOLT HOLE DIAMETER | INCHES NOMINAL 0.406 |
| ADML | MOUNTING FLANGE BOLT HOLE QUANTITY | 4 |
| BNXB | FLANGE MOUNTING FACE WIDTH | INCHES MINIMUM 2.375 AND INCHES MAXIMUM 3.500 |
| BNXC | FLANGE MOUNTING FACE LENGTH | INCHES MINIMUM 3.750 AND INCHES MAXIMUM 4.938 |
| BNXD | OUTPUT FLANGE LOCATION | ON FRONT AND REAR OUTPUT SHAFTS |
| BNZR | INPUT SHAFT END TYPE | FLANGED |
| ABTJ | MOUNTING HOLE QUANTITY | 8 |
| ATGD | MOUNTING THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| AXAR | FLANGE BOLT HOLE SPACING | SPACED ON 1-23/32 IN. BY 3-20/32 IN. CENTERS |
| AAMQ | MOUNTING THREADS PER INCH | 13 |
| AECS | BOLT HOLE QUANTITY | 4 |
| ACJB | MOUNTING HOLE THREAD CLASS | 3A |
| BNZW | MOUNTING FACE LENGTH | INCHES NOMINAL 3.750 |
Supersedes
This item replaces cancelled NIIN 003794172. An older drawing citing one of those numbers resolves here.