NSN 5305-00-068-8429 · NIIN 000688429 · FSC 5305
NO DASHES 5305000688429
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.151 AND INCHES MAXIMUM 0.183 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.0625 AND INCHES MAXIMUM 0.0635 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 43.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| MATT | MATERIAL | OVERALL STEEL |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.218 AND INCHES MAXIMUM 0.255 |
| ABQZ | INTERNAL DRIVE STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 82.0 |
Supersedes
This item replaces cancelled NIIN 001414631. An older drawing citing one of those numbers resolves here.