NSN 5310-00-433-1173 · NIIN 004331173 · FSC 5310
NO DASHES 5310004331173
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADEB | PLATE THICKNESS | INCHES MINIMUM 0.017 AND INCHES MAXIMUM 0.047 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.690 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADEA | NUT HEIGHT | INCHES NOMINAL 0.313 |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| ACTA | NUT STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BASE ASSN STD SINGLE MATERIAL RESPONSE SAE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT ASSN STD SINGLE MATERIAL RESPONSE A-S 5010 |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ACVN | NUT LENGTH | INCHES MINIMUM 0.954 AND INCHES MAXIMUM 0.984 |
| MATT | MATERIAL | CHANNEL PLASTIC POLYAMIDE NYLON |
| MATT | MATERIAL | NUT STEEL COMP 1212 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| BZRR | THREAD SERIES | UNF |
| AAJD | THREAD CLASS | 3B |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
Supersedes
This item replaces cancelled NIINs 002082680 · 002079434 · 005967714 · 007838270 · 007922286. An older drawing citing one of those numbers resolves here.