NSN 5990-00-135-9452 · NIIN 001359452 · FSC 5990
NO DASHES 5990001359452
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.720 AND ROTOR TO STATOR MAXIMUM 0.749 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNEF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.3550 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 25.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 700.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 AND INCHES MAXIMUM 0.0830 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1290 AND INCHES MAXIMUM 0.1350 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4230 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0006 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.3910 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.0210 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4340 AND INCHES MAXIMUM 1.4370 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 60.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 20.000 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 8.0 |