NSN 5306-00-076-4205 · NIIN 000764205 · FSC 5306
NO DASHES 5306000764205
In Stock
BOLT,EXTERNALLY RELIEVED BODY
Bolts
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.408 AND INCHES MAXIMUM 0.438 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 4.023 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.255 |
| AAWE | THIRD DIAMETER FROM HEAD | INCHES NOMINAL 0.309 |
| AAWK | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | INCHES NOMINAL 1.840 |
| AAWL | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER | INCHES NOMINAL 2.150 |
| AAWM | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER | INCHES MINIMUM 3.580 AND INCHES MAXIMUM 3.620 |
| AATC | EXTENDED WASHER DIAMETER | INCHES NOMINAL 0.580 |
| AATD | EXTENDED WASHER THICKNESS | INCHES NOMINAL 0.050 |
| AAWF | FOURTH DIAMETER FROM HEAD | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.585 |
| AAWG | FIFTH DIAMETER FROM HEAD | INCHES NOMINAL 0.312 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.311 AND INCHES MAXIMUM 0.312 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.375 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES MINIMUM 0.730 AND INCHES MAXIMUM 0.770 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.319 |
Supersedes
This item replaces cancelled NIIN 008466540. An older drawing citing one of those numbers resolves here.