NSN 4320-00-871-2315 · NIIN 008712315 · FSC 4320
NO DASHES 4320008712315
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASMM | CONNECTION QUANTITY | 1 AND 1 |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 3600.0 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.562 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 1.312 |
| AZFF | BOLT HOLE SPACING | 1.406 IN BY 2.750 IN |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AWLS | CONNECTION TYPE | DRAIN AND OUTLET |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 1.063 |
| AXFC | CONNECTION DESIGN | FLANGED |
| ASAP | SPLINE PITCH | 12/24 |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2000PSI AT 180 DEG F |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| MATT | MATERIAL | HOUSING IRON CAST |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ABSA | SPLINE QUANTITY | 14 |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 2.188 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 1625.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 6.375 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.667 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| AAXX | MOUNTING TYPE | FLANGE |
| AXFD | BOLT HOLE THREAD SIZE | 0.500-13 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.247 AND INCHES MAXIMUM 1.248 |