NSN 3020-00-268-4199 · NIIN 002684199 · FSC 3020
NO DASHES 3020002684199
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 1.127 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.750 |
| STYL | STYLE DESIGNATOR | |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.1373 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWPZ | HELIX ANGLE | DEGREES 23.4167 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.1953 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.0658 |
| AJLA | TEETH QUANTITY | 43 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.3480 |
| CWNH | TOOTH FORM | STANDARD |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.125 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.125 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.075 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.254 |
Supersedes
This item replaces cancelled NIIN 003781176. An older drawing citing one of those numbers resolves here.