NSN 5905-00-815-0963 · NIIN 008150963 · FSC 5905
NO DASHES 5905008150963
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.755 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 5400.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -70.0 TO 70.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 70.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.060 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.325 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.170 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.086 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.180 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.315 |
| AEDX | SHAFT STYLE | |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.060 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.016 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 125.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |