NSN 3020-01-434-8192 · NIIN 014348192 · FSC 3020
NO DASHES 3020014348192
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: JOINT STARS PROGRAM
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | JOINT STARS PROGRAM |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.0000 |
| AJLA | TEETH QUANTITY | 288 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | FIRST GEAR ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQFM | HARDNESS RATING | RETAINING RING ROCKWELL SUPERFICIAL 30-N MINIMUM 63.0 AND ROCKWELL SUPERFICIAL 30-N MAXIMUM 69.0 |
| CQFM | HARDNESS RATING | SECOND GEAR ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 40.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.0417 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.3500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.1650 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.2497 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.3120 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | SECOND END INCHES 0.2480 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| MATT | MATERIAL | RETAINING RING STEEL |
| MATT | MATERIAL | SPRING STEEL COMP 302 |
| MATT | MATERIAL | SECOND GEAR STEEL CORROSION RESISTING |
| MATT | MATERIAL | FIRST GEAR STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FIRST GEAR ASSN STD 1ST MATERIAL RESPONSE A-S 5643N |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINING RING ASSN STD 2ND MATERIAL RESPONSE A-S 5520 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SECOND GEAR ASSN STD 3RD MATERIAL RESPONSE A-S 5643N |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPRING MIL SPEC 4TH MATERIAL RESPONSE -IL-S-5059 |
| SFTT | SURFACE TREATMENT | RETAINING RING PASSIVATE |
| SFTT | SURFACE TREATMENT | SPRING PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | RETAINING RING FED SPEC 2ND TREATMENT RESPONSE QQ--35 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SPRING FED SPEC 1ST TREATMENT RESPONSE QQ--35 TYE 1 |
| STYL | STYLE DESIGNATOR |