NSN 3020-00-318-0908 · NIIN 003180908 · FSC 3020
NO DASHES 3020003180908
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.8300 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.166 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.6410 |
| AJLA | TEETH QUANTITY | 25 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 12 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.5714 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.8462 |
| STYL | STYLE DESIGNATOR | |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.383 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.609 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.995 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 2.434 |
| CWNH | TOOTH FORM | STUB |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.000 |
Supersedes
This item replaces cancelled NIINs 003474548 · 003789992. An older drawing citing one of those numbers resolves here.