NSN 5990-00-677-6496 · NIIN 006776496 · FSC 5990
NO DASHES 5990006776496
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 70.00 AND MAXIMUM 76.00 |
| AAQL | BODY STYLE | |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 4200.00 AND MAXIMUM 5100.00 |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 20.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 450.0 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| CQTM | TERMINAL LOCATION | REAR |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1350.00 AND MAXIMUM 1650.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 14.00 AND MAXIMUM 20.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 14.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 0.2 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.2990 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 2.5000 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 2.2500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6760 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
Supersedes
This item replaces cancelled NIINs 000603060 · 002265279 · 008798957. An older drawing citing one of those numbers resolves here.