NSN 5990-00-568-4932 · NIIN 005684932 · FSC 5990
NO DASHES 5990005684932
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| ABRY | LENGTH | SHOULDER INCHES MAXIMUM 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2402 AND INCHES MAXIMUM 0.2405 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 19.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 14 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 85.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 3200.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 86.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.900 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0330 AND INCHES MAXIMUM 0.0430 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6920 AND INCHES MAXIMUM 0.7180 |
| AJSL | BODY SIZE | 23 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9950 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9950 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.5950 AND INCHES MAXIMUM 0.6000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES MINIMUM 0.1640 AND INCHES MAXIMUM 0.1700 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 4.2430 AND INCHES MAXIMUM 4.2990 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2400 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2480 AND INCHES MAXIMUM 0.2500 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.980 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3100 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 3.5250 AND INCHES MAXIMUM 3.5810 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |