NSN 3020-01-290-1098 · NIIN 012901098 · FSC 3020
NO DASHES 3020012901098
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| AJLA | TEETH QUANTITY | 32 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.086 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.538 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.355 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 20.5648 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.160 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.156 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.062 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.130 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL NICKEL ALLOY |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 011945244. An older drawing citing one of those numbers resolves here.