NSN 5935-00-853-3746 · NIIN 008533746 · FSC 5935
NO DASHES 5935008533746
In Stock
CONNECTOR,PLUG,ELECTRICAL
Connectors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKFA | DISTANCE FROM CENTERLINE TO CABLE END | INCHES MAXIMUM 2.000 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES AND SILVER CONTACT SURFACES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.594 |
| ADMW | BODY ANGLE IN DEG | 90.0 |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| AAJD | THREAD CLASS | 2B |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S3108 |
| CXCG | INCLUDED CONTACT QUANTITY | 14 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD AND SILVER |
| ADZC | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT |
| AFQJ | CABLE ENTRANCE DIAMETER | INCHES MINIMUM 0.750 |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING NONREMOVABLE |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 |
| AFRE | CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 700.0 |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING SOLDER WELL |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-5015 |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.594 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.375 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.014 AND SILVER GRAINS, TROY 0.014 |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |