NSN 2040-01-701-4161 · NIIN 017014161 · FSC 2040
NO DASHES 2040017014161
In Stock
HULL SECTION,MIDGET SUBMARINE,MI
Marine Hardware and Hull Items
Application: NSSN CLASS PROPULSOR INCOMPRESSIBLE WEDGE
Technical characteristics
4 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | THE MAXIMUM STEP DROP, GAP ALLOWANCES AT THE OUTSIDE DIAMETER OF THE PROPULSOR SHALL BE: STEPS: 0.025"; DROPS: 0.050"; GAPS: 0.125"; PORT AND STARBOARD EDGES SHALL BE FLUSH TO WITHIN + OR - 0.050" OF ADJACENT STRUCTURE AREAS NOT CONFORMING TO THESE STEP, DROP; GAP ALLOWANCES MUST BE FAIRED IN WITHIN AN APPROVED INOMPRESSIBLE WEDGE MATERIAL OR APPROVED FAIRING COMPOUND; UNLESS OTHERWISE SPECIFIED ALL TAPERS OF INOMPRESSIBLE WEDGES AND FAIRINGS FACING FORWARD AND AFT SHALL BE A MINIMUM OF 10 TO 1; ALL TAPERS OF INCOMPRESSIBLE WEDGES AND FAIRINGS FACING PORT AND STARBOARD WILL BE BLENDED INTO THEIR CORRESPONDING 6 TO 1 MINIUMUM TAPERS; WHEN 2 OR MORE TAPERS MEET OR INTERSECT THE ANGLE INCLUDED BETWEEN THE TAPERS OF THE INTERSECTING WEDGES OR FAIRINGS SHALL BE NO LESS THAN THE ANGLE INCLUDED BETWEEN THE TAPER OF A STAND ALONE WEDGE OR FAIRING AND THE OUTSIDE DIAMETER OF THE PROPULSOR |
| AGAV | END ITEM IDENTIFICATION | NSSN CLASS PROPULSOR INCOMPRESSIBLE WEDGE |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | WEDGE, INCOMPRESSIBLE, AFT COVER PORT FAIRING |