NSN 5905-00-780-4630 · NIIN 007804630 · FSC 5905
NO DASHES 5905007804630
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 2.8280 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 280.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0800 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 6.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| AAQL | BODY STYLE | |
| AAPN | SECTION QUANTITY | 4 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0310 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 1.312 |
| AEDX | SHAFT STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 12 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 4.906 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 1.875 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 20.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 280.0 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.406 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.000 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0310 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 3.031 |
Supersedes
This item replaces cancelled NIINs 000223475 · 007791208. An older drawing citing one of those numbers resolves here.