NSN 5999-01-690-4220 · NIIN 016904220 · FSC 5999
NO DASHES 5999016904220
In Stock
SHIELDING GASKET,ELECTRONIC
Miscellaneous Electrical and Electronic Components
Application: CONTROLLER, RAMP WINCH
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABVL | APERTURE DIAMETER | INCHES MINIMUM 1.305 AND INCHES MAXIMUM 1.319 |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | INCHES NOMINAL 0.156 |
| MATT | MATERIAL | OVERALL RUBBER FLUOROSILICONE CLASS FQ AND ALUMINUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-DTL-83528, TYE D |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | INCHES NOMINAL 0.156 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER LATING |
| PRMT | PRECIOUS MATERIAL | SILVER |
| ADVM | CROSS-SECTIONAL THICKNESS | INCHES NOMINAL 0.030 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.459 AND INCHES MAXIMUM 1.475 |
| AECS | BOLT HOLE QUANTITY | 4 |
| ADPW | OUTSIDE CORNER RADIUS | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.150 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | INCHES MINIMUM 1.151 AND INCHES MAXIMUM 1.161 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | INCHES MINIMUM 1.151 AND INCHES MAXIMUM 1.161 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE AND SILVER |
| STYL | STYLE DESIGNATOR | |
| AGAV | END ITEM IDENTIFICATION | CONTROLLER, RAMP WINCH |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.459 AND INCHES MAXIMUM 1.475 |