NSN 5990-01-066-1526 · NIIN 010661526 · FSC 5990
NO DASHES 5990010661526
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.8120 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6790 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4180 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MINIMUM 33.0 AND MILLIAMPERES MAXIMUM 36.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MINIMUM 68.0 AND MILLIWATTS MAXIMUM 74.0 |
| AJSW | ZRO RESISTANCE IN OHMS | MINIMUM 570.00 AND MAXIMUM 675.00 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 9.50 AND MAXIMUM 10.80 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 920.00 AND MAXIMUM 1050.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 280.00 AND MAXIMUM 450.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 7.20 AND MAXIMUM 8.40 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 9.500 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2460 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0600 |
| CQRG | BODY MATERIAL | ALUMINUM OR STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | MINIMUM 3400.00 AND MAXIMUM 3500.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 28.00 AND MAXIMUM 32.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | MINIMUM 334.00 AND MAXIMUM 375.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, HOLLOWED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 2.0000 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.086 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6780 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |