NSN 2510-01-088-1686 · NIIN 010881686 · FSC 2510
NO DASHES 2510010881686
In Stock
TORSION BAR,SUSPENSION
Vehicular Cab, Body, and Frame Structural Components
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 51.630 AND INCHES MAXIMUM 51.750 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.309 AND INCHES MAXIMUM 1.559 |
| ACLK | FIRST END THREAD CLASS | 2B |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ADGN | FIRST END CHAMFER LENGTH | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.250 |
| ADGR | SECOND END CHAMFER LENGTH | INCHES MINIMUM 0.560 AND INCHES MAXIMUM 0.680 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 2.1875 |
| AMER | FIRST END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.880 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 2.0625 |
| AMGS | SECOND END HOLE DIAMETER | INCHES MAXIMUM 0.620 |
| AMHD | SECOND END HOLE DEPTH | INCHES MAXIMUM 0.620 |
| AQSQ | FIRST END THREAD SIZE | 1/2-20 |
| AQSR | FIRST END THREAD SERIES/TYPE DESIGNATOR | UNF |
| ASRX | TWIST DIRECTION | COUNTERCLOCKWISE |
| CFGQ | FIRST END CROSS-SECTIONAL SHAPE | SERRATED |
| CFGR | FIRST END TEETH QUANTITY | 35 |
| CFGS | FIRST END SERRATION LENGTH | INCHES MINIMUM 0.810 AND INCHES MAXIMUM 0.930 |
| CFGT | FIRST END MAJOR DIAMETER | INCHES MINIMUM 2.2450 AND INCHES MAXIMUM 2.2500 |
| CFGW | FIRST END PRESSURE ANGLE IN DEG | 45.00 |
| CFGX | SECOND END CROSS-SECTIONAL SHAPE | SERRATED |
| CFGY | SECOND END TEETH QUANTITY | 33 |
| CFGZ | SECOND END SERRATION LENGTH | INCHES MINIMUM 0.940 AND INCHES MAXIMUM 1.060 |
| CFHB | SECOND END MAJOR DIAMETER | INCHES MINIMUM 2.1200 AND INCHES MAXIMUM 2.1250 |
| CFHC | SECOND END PRESSURE ANGLE IN DEG | 45.00 |
| CFHF | SOLID BAR END CHARACTERISTIC AT FIRST END | THREADED HOLE |
| CFHG | SOLID BAR END CHARACTERISTIC AT SECOND END | UNTHREADED HOLE |
| CQCF | CONSTRUCTION | SOLID |
| FEAT | SPECIAL FEATURES | FIRST END TO BE COUNTER BORED 0.50 INCHES DIAMETER AND 0.25 INCHES DEEP;ONE SPLINE FROM EACH END SHALL BE REMOVED SO THAT THE ARCH BETWEEN EACH OF THE REMOVED SPLINES IS 129 DEGREES IN A COUNTERCLOCKWISE DIRECTION WHEN VIEWED FROM THE FIRST END |
| MATT | MATERIAL | STEEL |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M109.03.009 | A3QPJ |
| 10898193-1 | 19207 |
| 10898191 | 19207 |