NSN 6105-00-049-8884 · NIIN 000498884 · FSC 6105
NO DASHES 6105000498884
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.625 |
| AAJU | OVERALL LENGTH | INCHES 11.875 |
| AAJV | OVERALL WIDTH | INCHES 6.500 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.500 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 2.000 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.484 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.250 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 7.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS -45.0 AND AMBIENT CELSIUS 85.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3350.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 5.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 208.0 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SECOND IDENTICAL FLAT AT 90 DEGREES |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Supersedes
This item replaces cancelled NIIN 005002225. An older drawing citing one of those numbers resolves here.