NSN 6105-01-365-2631 · NIIN 013652631 · FSC 6105
NO DASHES 6105013652631
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 14.000 |
| AAJU | OVERALL LENGTH | INCHES 25.880 |
| AAJV | OVERALL WIDTH | INCHES 16.250 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.376 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.109 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 1.624 AND INCHES MAXIMUM 1.625 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 3.500 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CNMM | FRAME SIZE DESIGNATION | 256TND |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 15.000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 10.000 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1770.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 10.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 |