NSN 2520-00-062-3953 · NIIN 000623953 · FSC 2520
NO DASHES 2520000623953
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 41.281 AND INCHES MAXIMUM 41.406 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 0.783 |
| BNYW | FLANGE HOLE TAPER | INCHES NOMINAL PER FOOT 8.500 |
| MATT | MATERIAL | STEEL COMP 4150H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 4150H |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.406 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 0.500 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 38.0 AND MAXIMUM ROCKWELL C 48.0 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 6.123 AND INCHES MAXIMUM 6.127 |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 3.719 AND INCHES MAXIMUM 3.781 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.830 AND INCHES MAXIMUM 1.840 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.975 AND INCHES MAXIMUM 1.980 |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | TAPERED HOLE 12 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| C3TZ4234N | 23040 |
| C3TZ423N | 57526 |
| 33030-5008 | 62265 |
| 33030-5008 | 65282 |
| 056980 | 81118 |
| 56980 | 81142 |
| 2505838 | 12204 |