NSN 2520-00-102-2765 · NIIN 001022765 · FSC 2520
NO DASHES 2520001022765
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMQF | SECOND END TYPE | SPLINED |
| AMQA | FIRST END TYPE | FLANGED |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.317 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 17.938 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 45.0 AND MAXIMUM ROCKWELL C 48.0 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 3.938 AND INCHES MAXIMUM 3.969 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.500 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 0.915 AND INCHES MAXIMUM 0.957 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.123 AND INCHES MAXIMUM 1.125 |
| MATT | MATERIAL | STEEL COMP 4150 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 4150 |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 0.375 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 6 |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.313 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 40313 | 64986 |