NSN 2520-00-135-2309 · NIIN 001352309 · FSC 2520
NO DASHES 2520001352309
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | TAPERED HOLE 8 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNYS | FLANGE OVERALL THICKNESS | INCHES MINIMUM 1.031 AND INCHES MAXIMUM 1.094 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 1041H |
| BNYW | FLANGE HOLE TAPER | INCHES NOMINAL PER FOOT 6.000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 39.531 AND INCHES MAXIMUM 39.656 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 0.562 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 6.185 AND INCHES MAXIMUM 6.189 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 3.375 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.690 AND INCHES MAXIMUM 1.700 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.870 AND INCHES MAXIMUM 1.875 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.500 |
| MATT | MATERIAL | STEEL |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2457690AND3745182 | 23862 |
| 2448315 | 23862 |
| 2457690AND3745182 | 7X677 |
| 59502 | 81142 |
Supersedes
This item replaces cancelled NIIN 004859414. An older drawing citing one of those numbers resolves here.