NSN 2520-00-432-1745 · NIIN 004321745 · FSC 2520
NO DASHES 2520004321745
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| BNPJ | FIRST END FACILITY DIAMETER | INCHES NOMINAL 1.625 |
| BNTC | FIRST END FACILITY WIDTH | INCHES NOMINAL 0.125 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.250 |
| AMQA | FIRST END TYPE | TAPERED |
| AMQF | SECOND END TYPE | SPLINED |
| AQSQ | FIRST END THREAD SIZE | 0.875-14 |
| AMCZ | FIRST END KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ATKT | FIRST END THREAD SERIES | UNF |
| BNTG | FIRST END BEARING SEAT WIDTH | INCHES NOMINAL 1.000 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| ABFF | FURNISHED ITEMS | FIRST END BEARING SEAT |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 32.750 |
| AMDG | FIRST END KEYWAY DEPTH | INCHES NOMINAL 0.188 |
| BBCF | SECOND END SPLINE QUANTITY | 29 |
| AMEL | FIRST END BEARING SEAT DIAMETER | INCHES NOMINAL 1.375 |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | INCHES NOMINAL 4.750 AND INCHES NOMINAL 6.375 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.750 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES NOMINAL 1.156 |
| AMCP | FIRST END TAPER | INCHES NOMINAL PER FOOT 0.389 |
| BNYZ | FIRST END PIN HOLE DIAMETER | INCHES NOMINAL 0.125 |
| MATT | MATERIAL | STEEL |
| BNTD | FIRST END FACILITY LOCATION | 5.750 IN. FROM SHAFT END |
| AMCR | FIRST END TAPER MAJOR DIAMETER | INCHES NOMINAL 1.188 |