NSN 2520-00-554-7857 · NIIN 005547857 · FSC 2520
NO DASHES 2520005547857
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 2.952 AND INCHES MAXIMUM 2.960 |
| BNPK | SECOND END FACILITY DIAMETER | INCHES MINIMUM 2.998 AND INCHES MAXIMUM 3.002 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 2.595 AND INCHES MAXIMUM 2.600 |
| AMQA | FIRST END TYPE | SPLINED |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 3.4375 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 2.595 AND INCHES MAXIMUM 2.600 |
| BNTR | SECOND END FACILITY WIDTH | INCHES NOMINAL 2.250 |
| BNTS | SECOND END FACILITY LOCATION | LOCATED 6-1/4 IN. FROM SHAFT END |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 50.500 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 3.250 |
| MATT | MATERIAL | STEEL COMP 4340 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 2.952 AND INCHES MAXIMUM 2.960 |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 10 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 4340 OR ASSN STD SINGLE MATERIAL RESPONSE SAE 4340 |