NSN 2520-00-561-6666 · NIIN 005616666 · FSC 2520
NO DASHES 2520005616666
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.671 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 6.250 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.188 |
| BNYW | FLANGE HOLE TAPER | INCHES NOMINAL PER FOOT 6.000 |
| AMQA | FIRST END TYPE | FLANGED |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 1.285 |
| ZZZV | FSC APPLICATION DATA | AXLE ASSY,AMERICAN COLEMAN CO. PART NO. 668-37,COLEMAN G40 TRACTOR,WHEELED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | TAPERED HOLE 8 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNPK | SECOND END FACILITY DIAMETER | INCHES NOMINAL 1.937 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 37.050625 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 0.783 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.410 |
| BNTR | SECOND END FACILITY WIDTH | INCHES NOMINAL 1.500 |
| BNTS | SECOND END FACILITY LOCATION | LOCATED 18-1/64 IN. FROM SHAFT SPLINED END |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 40.0 AND MAXIMUM ROCKWELL C 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| MATT | MATERIAL | STEEL COMP 4150 OR STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE SAE 4150 OR ASSN STD 2ND MATERIAL RESPONSE SAE 4340 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 597-30 | 96606 |