NSN 2520-00-586-9866 · NIIN 005869866 · FSC 2520
NO DASHES 2520005869866
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.830 AND INCHES MAXIMUM 1.840 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.375 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 40.469 AND INCHES MAXIMUM 40.594 |
| ABUJ | THREAD SIZE | 1/2-13 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.975 AND INCHES MAXIMUM 1.980 |
| AMQA | FIRST END TYPE | FLANGED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 6.623 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNYS | FLANGE OVERALL THICKNESS | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.562 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.562 |
| MATT | MATERIAL | STEEL COMP 4150H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 4150H |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 AND UNTHREADED HOLE(S) 2 |
| AMQF | SECOND END TYPE | SPLINED |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 3.312 |