NSN 2520-00-717-7858 · NIIN 007177858 · FSC 2520
NO DASHES 2520007177858
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 42.0 AND MAXIMUM ROCKWELL C 47.0 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNPJ | FIRST END FACILITY DIAMETER | INCHES NOMINAL 1.812 |
| BNTC | FIRST END FACILITY WIDTH | INCHES NOMINAL 0.109 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 2.312 |
| BBCD | FIRST END SPLINE QUANTITY | 16 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 57.219 |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 20.0 |
| BNYX | FIRST END SPLINE TYPE | INVOLUTE |
| BNYY | FIRST END SPLINE PRESSURE ANGLE IN DEG | 20.0 |
| MATT | MATERIAL | STEEL COMP 4145H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 4145H |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 1.860 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.312 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.860 |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BNTD | FIRST END FACILITY LOCATION | LOCATED 0.166 IN. MIN,0.176 IN. MAX FROM SHAFT END |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 007-112371 | 3NNX8 |
| 007-112371 | 52993 |
| 112371 | 77237 |
| 112371 | 12603 |