NSN 2520-00-735-0172 · NIIN 007350172 · FSC 2520
NO DASHES 2520007350172
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 0.453 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 36.344 |
| ABUJ | THREAD SIZE | 1/2-13 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 6.250 AND INCHES MAXIMUM 6.255 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.807 AND INCHES MAXIMUM 1.817 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.506 AND INCHES MAXIMUM 0.509 |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 6 AND THREADED HOLE(S) 2 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.375 |
| MATT | MATERIAL | STEEL |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.250 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.600 AND INCHES MAXIMUM 1.610 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.