NSN 2520-00-737-4986 · NIIN 007374986 · FSC 2520
NO DASHES 2520007374986
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 21.428 AND INCHES MAXIMUM 21.478 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.039 AND INCHES MAXIMUM 1.049 |
| AMQF | SECOND END TYPE | SPLINED |
| AMCR | FIRST END TAPER MAJOR DIAMETER | INCHES NOMINAL 1.377 |
| AMCZ | FIRST END KEYWAY WIDTH | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2505 |
| AMDG | FIRST END KEYWAY DEPTH | INCHES MINIMUM 0.127 AND INCHES MAXIMUM 0.137 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.500 |
| MATT | MATERIAL | STEEL COMP 1033 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.222 AND INCHES MAXIMUM 1.227 |
| AQSQ | FIRST END THREAD SIZE | 1-14 |
| ATKT | FIRST END THREAD SERIES | UNF |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNYZ | FIRST END PIN HOLE DIAMETER | INCHES NOMINAL 0.172 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 1033 |
| AMCP | FIRST END TAPER | INCHES NOMINAL PER FOOT 1.000 |
| AMQA | FIRST END TYPE | TAPERED |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 42.0 AND MAXIMUM ROCKWELL C 48.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 003086044 · 003474543. An older drawing citing one of those numbers resolves here.