NSN 2520-00-741-1267 · NIIN 007411267 · FSC 2520
NO DASHES 2520007411267
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.938 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 8653 |
| BBCF | SECOND END SPLINE QUANTITY | 27 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 26.886 |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 1.125 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.438 |
| BNYW | FLANGE HOLE TAPER | INCHES NOMINAL PER FOOT 6.000 |
| MATT | MATERIAL | STEEL COMP 8653 |
| AMQF | SECOND END TYPE | SPLINED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 36.385 |
| ABQB | TAPER MAJOR DIAMETER | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.750 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 34.3 AND MAXIMUM ROCKWELL C 39.1 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 6.250 AND INCHES MAXIMUM 6.270 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.500 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.680 |
| AMQA | FIRST END TYPE | FLANGED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 8 |
| FEAT | SPECIAL FEATURES | BRACKET EYE LOCATED ON EXTERNAL SIDE OF FLANGE - 15/16 IN. DIA EYE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003449864. An older drawing citing one of those numbers resolves here.