NSN 2520-00-943-8474 · NIIN 009438474 · FSC 2520
NO DASHES 2520009438474
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BNTD | FIRST END FACILITY LOCATION | 0.219 IN. FROM SHAFT END |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTC | FIRST END FACILITY WIDTH | INCHES NOMINAL 0.125 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 20.500 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.495 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.750 |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 6 |
| BBCF | SECOND END SPLINE QUANTITY | 19 |
| BNPJ | FIRST END FACILITY DIAMETER | INCHES NOMINAL 1.031 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.136 |
| AMQA | FIRST END TYPE | SPLINED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI 4130 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| AETC | METALLIC HARDNESS RATING | MAXIMUM ROCKWELL C 42.0 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 1.619 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES NOMINAL 1.265 |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 65D35226-7 | 98296 |
| 65D35226-11 | 98296 |
| 65D35226-7 | 98750 |
| 65D35226-11 | 0ZLV2 |
| 65D35226-11 | 18894 |