NSN 2520-00-957-1471 · NIIN 009571471 · FSC 2520
NO DASHES 2520009571471
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 1.750 |
| BBCF | SECOND END SPLINE QUANTITY | 23 |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 3.4375 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 2.112 AND INCHES MAXIMUM 2.122 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | TAPERED HOLE 8 |
| AMQA | FIRST END TYPE | FLANGED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 48.313 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 0.938 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES NOMINAL 8.375 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.438 |
| BNYW | FLANGE HOLE TAPER | INCHES NOMINAL PER FOOT 6.000 |
| MATT | MATERIAL | STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AISI C1045 OR ASSN STD SINGLE MATERIAL RESPONSE SAE 1045 |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | INCHES MINIMUM 2.247 AND INCHES MAXIMUM 2.252 |
| AMQF | SECOND END TYPE | SPLINED |