NSN 2520-01-676-3585 · NIIN 016763585 · FSC 2520
NO DASHES 2520016763585
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Application: 2320-01-652-5208;TRUCK,UTILITY
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BNTX | END HOLE TYPE | DRILLED |
| AMQA | FIRST END TYPE | SPLINED |
| AMGB | SECOND END SPLINE MINOR DIAMETER | MILLIMETERS NOMINAL 43.730 |
| AGGP | DRILLED HOLE DIAMETER | MILLIMETERS NOMINAL 12.35 |
| BNTL | SECOND END GEAR TEETH DIRECTION | STRAIGHT |
| BNTM | SECOND END SPLINE TYPE | EXTERNAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | MILLIMETERS NOMINAL 46.860 |
| ABHP | OVERALL LENGTH | MILLIMETERS NOMINAL 949.9 |
| AMQF | SECOND END TYPE | SPLINED |
| BBCF | SECOND END SPLINE QUANTITY | 36 |
| BNYX | FIRST END SPLINE TYPE | EXTERNAL |
| BNYY | FIRST END SPLINE PRESSURE ANGLE IN DEG | 37.5 |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 37.5 |
| AGAV | END ITEM IDENTIFICATION | 2320-01-652-5208;TRUCK,UTILITY |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE |
| ASXK | HOLE QUANTITY | 6 |
| BBCD | FIRST END SPLINE QUANTITY | 36 |
| BNYR | FIRST END GEAR TEETH DIRECTION | STRAIGHT |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | MILLIMETERS NOMINAL 46.860 |
| AMDM | FIRST END SPLINE LENGTH | MILLIMETERS NOMINAL 35.0 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | MILLIMETERS NOMINAL 43.730 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12607939 | 19207 |
| EBJ133MBD06D | 4WFC5 |
| 12607939 | 75Q65 |
| EBJ133MBD06D | 0LTL1 |
Supersedes
This item replaces cancelled NIIN 015564140. An older drawing citing one of those numbers resolves here.