NSN 2530-00-359-1376 · NIIN 003591376 · FSC 2530
NO DASHES 2530003591376
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | INCHES NOMINAL 2.400 |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN |
| ABND | TAPER LENGTH | INCHES NOMINAL 1.000 |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 80.0 |
| AJLA | TEETH QUANTITY | 36 |
| APGF | DESIGN TYPE | OFFSET |
| ABMZ | DIAMETER | INCHES MINIMUM 0.940 AND INCHES MAXIMUM 0.950 |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES NOMINAL 0.720 |
| CFBY | SMALL END TEETH DEPTH | INCHES NOMINAL 0.0366 |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES NOMINAL 8.500 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| ZZZV | FSC APPLICATION DATA | VEHICULAR BRAKE,STEERING,AXLE,WHEEL,AND TRACK COMPONENTS |
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| CFBW | SMALL END MAJOR DIAMETER | INCHES MINIMUM 1.182 AND INCHES MAXIMUM 1.187 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006999471. An older drawing citing one of those numbers resolves here.