NSN 2530-00-689-5729 · NIIN 006895729 · FSC 2530
NO DASHES 2530006895729
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES NOMINAL 1.310 |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEGREE,37 MINUTES |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | INCHES NOMINAL 3.120 |
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| ABND | TAPER LENGTH | INCHES NOMINAL 1.310 |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 80.0 |
| ADGE | BORE LENGTH | INCHES NOMINAL 1.000 |
| AGWJ | BORE SMALLEST DIAMETER | INCHES MINIMUM 0.940 AND INCHES MAXIMUM 0.944 |
| AJLA | TEETH QUANTITY | 32 |
| APGF | DESIGN TYPE | OFFSET |
| CFBY | SMALL END TEETH DEPTH | INCHES NOMINAL 0.0665 |
| CFBW | SMALL END MAJOR DIAMETER | INCHES NOMINAL 1.643 |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/BALL STUD BORE |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES NOMINAL 7.000 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 484645 | 49185 |
| 5693176 | 52788 |
| 13208E6780 | 97403 |
| 484645 | 02280 |
| 5693176 | 0A335 |