NSN 2530-00-736-9962 · NIIN 007369962 · FSC 2530
NO DASHES 2530007369962
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | INCHES NOMINAL 3.000 |
| APGF | DESIGN TYPE | OFFSET |
| AGWJ | BORE SMALLEST DIAMETER | INCHES NOMINAL 0.859 |
| AJLA | TEETH QUANTITY | 36 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 1.750 |
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| ABND | TAPER LENGTH | INCHES NOMINAL 1.250 |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 74.0 |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES MINIMUM 1.469 AND INCHES MAXIMUM 1.531 |
| CFBW | SMALL END MAJOR DIAMETER | INCHES NOMINAL 1.656 |
| CFBX | TEETH CUT ANGLE IN DEG | 4 DEG |
| CFBY | SMALL END TEETH DEPTH | INCHES NOMINAL 0.094 |
| ADGE | BORE LENGTH | INCHES MINIMUM 1.157 AND INCHES MAXIMUM 1.219 |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/BALL STUD BORE |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES MINIMUM 4.500 AND INCHES MAXIMUM 4.625 |