NSN 2530-00-737-1031 · NIIN 007371031 · FSC 2530
NO DASHES 2530007371031
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| AJLA | TEETH QUANTITY | 36 |
| ABND | TAPER LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.600 |
| APGF | DESIGN TYPE | OFFSET |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | INCHES NOMINAL 1.620 |
| CFBY | SMALL END TEETH DEPTH | INCHES NOMINAL 0.0348 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.859 AND INCHES MAXIMUM 0.864 |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES MINIMUM 4.940 AND INCHES MAXIMUM 5.060 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES MINIMUM 0.720 AND INCHES MAXIMUM 0.760 |
| CFBW | SMALL END MAJOR DIAMETER | INCHES MINIMUM 0.837 AND INCHES MAXIMUM 0.839 |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 90.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003257484. An older drawing citing one of those numbers resolves here.