NSN 2530-00-737-5393 · NIIN 007375393 · FSC 2530
NO DASHES 2530007375393
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES NOMINAL 0.750 |
| CFBW | SMALL END MAJOR DIAMETER | INCHES MINIMUM 0.874 AND INCHES MAXIMUM 0.876 |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEG,37 MIN |
| CFBY | SMALL END TEETH DEPTH | INCHES NOMINAL 0.0375 |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES NOMINAL 5.000 |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 90.0 |
| APGF | DESIGN TYPE | OFFSET |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | INCHES NOMINAL 1.500 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| ABGL | WIDTH | INCHES NOMINAL 0.625 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.875 |
| ABND | TAPER LENGTH | INCHES NOMINAL 0.563 |
| AJLA | TEETH QUANTITY | 36 |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |